Other

File E214180 Vol. 1 Sec. 16 Page 13B Issued: 2007-10-02
and Report Revised: 2019-01-31
SIDE VIEW OF MODELS E(A)M720C##-PM, E(A)M820C##-PM WITHOUT COVER - FIG. 5A, 5B
General – Fig. 5A shows right side view of the Model E(A)M720C##-PM with
the enclosure removed. Fig. 5B shows right side view of the Model
E(A)M820C##-PM with the enclosure removed. Figs. 5A & 5B are identical to
Fig. 5 except as described below.
*1. Cooling Fan Air Guide – (For Model E(A)M720C##-PM only) R/C (QMFZ2),
SUPER-DRAGON ENGINEERING PLASTICS CO LTD (E201164), Type FRPP410+, rated
V-0 and 65C. Measured 125 mm by 118 by 66 mm and maintained minmum 0.8
mm spacing to live parts. Secured to Rear Enclosure by integral tabs
and screws.
Alternate – Same as above except Guangdong Aldex Advanced Plastics Co.,
Ltd. (E493989), Type PP900F20.
Alternate - (For Model E(A)M820C##-PM only) R/C (QMFZ2), Same as above
except measured 159 mm by 118 by 75 mm. See ILL. 8 for details.
2. Steel Air duct – Steel. Measured 0.5 mm thick, overall 80 by 67 by
46 mm. Secured to Oven Cavity top side by integral steel tabs and a
screw.
Alternate – (Not for E(A)M720C##-PM) Same as above except measured 0.4
mm thick, overall 73 by 67 by 46 mm.
3. Interlock switch supporter - R/C (QMFZ2), BASF SE (E41871). Type POM
N2320-003, rated HB, 90 C. Measured overall 140 mm by 60 mm by 42 mm,
1.5 mm thick. Secured to Front Panel by two integral tabs and two
screws.
Alternate – Same as above except SUPER-DRAGON ENGINEERING PLASTICS CO
LTD (E201164), Type PBTFRG30+, rated V-0, 130C.