Other

File E214180 Vol. 1 Sec. 16 Page 13A Issued: 2007-10-02
and Report Revised: 2015-01-05
MODELS E(A)M820C##, E(A)M820C##-PM
General - Models E(A)M820C## and E(A)M820C##-PM are identical to model
E(A)M720C## except as described below.
1. Magnetron - Cat. No. 2M219J manufactured by WITOL. See File E214180,
Vol. 1, Sec. 7, Page 14, Report dated 2004-02-20 for details. Grounding
continuity maintained by positive metal to metal contact between
magnetron fram and wave guide. Internal wire near magnetron is secured
to cavity not enough to touch magnetron
2. High Voltage Capacitor - Metal case, model CH85, (manufactured by Ningbo
Bicai Ind. Co., Ltd.) rated 0.85 uF, 2100 V ac, oil-filled metal
enclosed type. Secured to Cooling Fan Guide by 0.5 mm thick plated steel
strap which is secured to bottom enclosure by a screw. Therminals are
guarded with phenolic insulators. Capacitor shifting is prevented by
integral lip of steel strap holding capacitor case.
Alternate – Same as above except model HCH212, (manufactured by
Tianjin Hansung Electronics)
Alternate – Same as above except model CH86 and CH85, (manufactured by
Ninguo Jiahua Electric)
Alternate – Same as above except manufactured by TianJin Taeil
Electronics Co.,ltd, type MWOC/T series.
*3. High Voltage Transformer – Model MD-801AMR-1, rated 120 V, 60 Hz, by
GUANGDONG MIDEA KITCHEN APPLIANCES MFG CO LTD, provided with Recognized
Component insulation system(OBJY2)( E306927), designated BWL-R, Class
220 (R), by GUANGDONG MIDEA KITCHEN APPLIANCES MFG CO LTD. For the
details construction, refer to File E214180, Vol. 1, Sec. 9, Fig. 5