Other

File E214180 Vol. 1 Sec. 16 Page 7D Issued: 2007-10-02
and Report Revised: 2013-08-06
ALTERNATE FRONT VIEW OF MODELS E(A)M820C##-PM AND MM720C##-PM WITH DOOR OPEN -
FIGS. 3H AND 3I
General - Models E(A)M820C##-PM and MM720C##-PM employ the alternate cavity
openings as below. Fig. 3H shows the front view with the door open of Models
E(A)M820C##-PM and MM720C##-PM with alternate cavity openings. Fig. 3H is
identical to Fig. 3 (Compares to Fig. 3G for MM720C##-PM) except the left side
openings shown in Fig. 3I. Also represents other models unless otherwise
specified.
1. Ventilation Openings - A series of holes measuring 3.0 mm diameter each,
covers overall area measuring approximately 135 mm by 55 mm, located in
cavity left side wall. For details, refer to Fig. 3I.
2. Oven Lamp and Air Inlet Opening - A series of holes measuring 3.0 mm
diameter each, covering overall area measuring approximately 55.5 mm by
47.5 mm, located in the cavity right side wall. For details, refer to
Fig. 3H.