Other

File E214180 Vol. 1 Sec. 16 Page 7A Issued: 2007-10-02

and Report Revised: 2017-10-27

FRONT VIEW MODEL E(A)M720C##-PM WITH DOOR OPEN - FIG. 3B, 3C AND 3D

General - FIG. 3B shows the front view of Model E(A)M720C##-PM with the

door open. Fig. 3B is identical to Fig. 3 except the below items.

1. Microwave Guide Inlet Opening - Inlet opening measures 86 mm wide by

47 mm high, located on the cavity right side wall. Provided with a

mica, measured 64 mm by 116 mm, min 0.35 mm thickness. Secured by

integral tabs to cavity.

Alternate – Same as above except provided with a plastic cover, R/C

(QMFZ2), Guangdong Aldex Advanced Plastics Co., Ltd. (E493989), Type PP

140F, rated HB, 65C, measures 115 mm by 113 MM by 26 mm high, minimum

1.3 mm thick.

2. Ventilation Openings - A series of holes measuring 3.0 mm diameter each,

located in cavity left (covering two areas, one measured approximately

overall 135 mm by 55 mm wide and the other one measured approximately

overall 77 mm by 33 mm wide) and top side walls (covering two areas, one

measured approximately overall 67 mm by 10 mm wide and the other one

measured approximately overall 77 mm by 7 mm wide). For details, refer

to Figs. 3C and 3D.

3. Oven Cavity – Steel, epoxy painted or stainless, minimum 0.4 mm thick.

Either spot-welded or riveted to oven cavity front plate and rear

enclosure. Cavity dimensions are maximum measurements and may not

accurately indicate the total cavity volume.

Oven Cavity Max Dimensions (mm)

Oven Cavity Sizes

(l)

Width

Height

Depth

307

218

307