Other
File E214180 Vol. 1 Sec. 16 Page 7 Issued: 2007-10-02
and Report Revised: 2017-10-27
FRONT VIEW MODEL EM720C## WITH DOOR OPEN - FIG. 3 and 3A
General - Shows view of Model EM720C## with the door open. Represents
all models unless otherwise indicated.
1. Microwave Guide Inlet Opening - Inlet opening measures 86 mm wide by
39 mm high, located on the cavity right side wall. Provided with a mica,
measured 64 mm by 116 mm, min 0.35 mm thickness. Secured by integral
tabs to cavity.
Alternate – Same as above except provided with a plastic cover, R/C
(QMFZ2), Guangdong Aldex Advanced Plastics Co., Ltd. (E493989), Type PP
140F, rated HB, 65C, measures 115 mm by 113 MM by 26 mm high, minimum
1.3 mm thick.
2. Ventilation Openings - A series of holes measuring 3.0 mm diameter each,
located in cavity left side wall. For details, refer to Fig.3A.
3. Oven Lamp and Air Inlet Opening - A series of holes measuring 3.0 mm
diameter each, located in the cavity right side wall. Covers overall
area measuring approximately 76 mm by 55 mm.
4. Oven Cavity – Steel, epoxy painted or stainless, minimum 0.4 mm thick.
Either spot-welded or riveted to oven cavity front plate and rear
enclosure. Cavity dimensions are maximum measurements and may not
accurately indicate the total cavity volume.
Oven Cavity Max Dimensions (mm)
Oven Cavity Sizes
(l)
Width
Height
Depth
19.6
306
208
307
5. Glass Turntable Tray – (All Models except E(A)M720C##-PM & E(A)M820C##-
PM) Measures 245 mm diameter. Tray supported by Turntable Support.
Alternate – (For Models E(A)M720D##, MM720C##-PM, MM720C##-PMB ,
E(A)M720C##-PM & E(A)M820C##-PM) Same as above except measured 255 mm
diameter.
6. Turntable Support- R/C (QMFZ2), rated HB minimum. Three pairs of plastic
wheels provided.