Other

File E214180 Vol. 1 Sec. 16 Page 5 Issued: 2007-10-02
and Report Revised: 2014-07-31
MODEL EM720C##, E(A)M720C##-PM, E(A)M820C##-PM - FIG. 1, 1-1 ,1A, AND 1B
General - Fig. 1 shows the front view of the Model EM720C## and Fig. 1-1
shows the left side view of the Model EM720C##. Represents all models unless
otherwise indicated. Fig. 1A and Fig. 1B show the right side view of Models
E(A)M720C##-PM and E(A)M820C##-PM.
1. Door Assembly - Secured by door hinges. Refer to Figure 8 for door
assembly descriptions.
2. Display Lens and touch pad – Any R/C (QMFZ2) plastic, rated HB
minimum.
3. Top and side Enclosure – Painted Steel or stainless steel minimum 0.4 mm
thick, measuring 440 mm 238 mm by 264 mm, Secured to oven cavity chassis
by integral tabs and screws. One or more screws provided with serrated
head or toothed star washer to cut through paint for grounding. Front
edge is folded over and is provided with slots which mate with flanges
on oven cavity chassis.
Alternate – (For Models E(A)M720C##-PM and E(A)M820C##-PM only) Same as
above except right side of Enclosure shape shown as Fig. 1A.
4. Ventilation Openings – Provided with louvered openings measured approx.
30 mm by 6 mm are provided in the area of 190 mm by 26 mm and 110 mm by
36 mm on the left side.
5. Electronic Controller Assembly – GUANGDONG MIDEA MICROWAVE AND
ELECTRICAL APPLIANCES MFG CO LTD. Model MD2005L or MD2005LS or
MD2005LSB, power control PWB. Refer to file E214180, Vol. 3. Sec. 5 for
additional details.
Cooking
Mode
First Step
Repeated Step
Total
Cooking Time
Indicator
Display
Microwave
Full power,
15min
80% power, 18s on 4s
off
99min99sec
PL10
Alternate - (For Model AM720C##-PM only) GUANGDONG MIDEA KITCHEN
APPLIANCES MFG CO LTD. Model AGXEEXX-81-K, power control PWB. Refer to
file E214180, Vol. 3. Sec. 5 for additional details.
*