File E214180 Project 07CA40818 Issued: October 02, 2007 Revised: November 11, 2014 REPORT On MICROWAVE COOKING APPLIANCES * GUANGDONG MIDEA KITCHEN APPLIANCES MFG CO LTD Guangdong, 528311 China Copyright © 2007 Underwriters Laboratories Inc. Underwriters Laboratories Inc. authorizes the above named company to reproduce this Report provided it is reproduced in its entirety.
File E214180 Vol. 1 Sec.
File E214180 Vol. 1 Sec. 16 and Report Page 1-1 Issued: Revised: 2007-10-02 2018-10-18 ELECTRICAL RATINGS Models EM720C##, AM720C##, E(A)M720C***, MM720C## E(A)M720C##-PM, E(A)M720C***-PM, NS-7CM6-BK, NS-7CM6-SS, NS-7CM6-WH, RVS486001501, RVS486001502, MW-07009-01, NS7CM6WH-C, MM720C##PM, MM720C##-PMB, EM720D##-P0 CP41079, PS71071, PS71072, PS71078, PS71079, CE21061, CE21069, CE21065, CS51061, EM720CWA-PMB 405.73072310, 405.
File E214180 Vol. 1 Sec. 16 and Report ENGINEERING CONSIDERATIONS: Page 1A Issued: Revised: 2007-10-02 2018-03-30 (Not for Field Representative's Use) The products covered by this Report are microwave cooking appliances intended for household use. The appliances incorporate air cooled magnetrons, with a transformer for the high voltage and filament voltage supplies, for generating microwave energy.
File E214180 Vol. 1 Sec. 16 and Report Page 1B Issued: Revised: 2007-10-02 2013-08-06 Model differences Model EM720C## is identical to model AM720C## except for cosmetic differences. Model MM720C## is identical to model AM720C## except for that mechanical control employed and different HV transformer. Model E(A)M820C## is identical to model E(A)M720C## except for higher input wattage, and different HV transformer, HV Capacitor, Magnetron and Power Control PWB.
File E214180 Vol. 1 Sec. 16 and Report Page 1C Issued: Revised: 2007-10-02 2018-10-18 Models RVS486001501 and RVS486001502 are identical to Model EM720C##-PM except model name. Model EM720C##-PMB is identical to Model EM720C##-PM except for model name. Models NS-7CM6-BK, NS-7CM6-SS and NS-7CM6-WH are identical to Model EM720C##-PM except model name. Models EM720C##-PMUA and EM720C##-PMUK are identical to model EM720D##P0 except model name.
File E214180 Vol. 1 Sec. 16 and Report MODELS DIFFERENCES: (CONT’D) A B (Basic Model) E(A)M720C*** MM720C*** E(A)M720C***-PM MM720C***-PM MM720C***-PMB E(A)M820C*** E(A)M820C***-PM EM720C***-PMB EM720C***-PMR EM720C***-B EM720C***-W EM720C***-R EM720D***-P0 405.73072310 EM720C***-PMUA EM720C***-PMUK E(A)M720D*** E(A)M720C***-PMU E(A)M720C## MM720C## E(A)M720C##-PM MM720C##-PM MM720C##-PMB E(A)M820C## E(A)M820C##-PM EM720C##-PMB EM720C##-PMR EM720C##-B EM720C##-W EM720C##-R EM720D##-P0 405.
File E214180 Vol. 1 Sec. 16 and Report Page 2 Issued: Revised: 2007-10-02 2019-01-31 CONSTRUCTION DETAILS: GROUNDING: All exposed dead-metal parts and all dead-metal parts inside the enclosure which may be exposed to contact during any servicing operation, including maintenance and repair, and that may become energized, are reliably connected to the grounding conductor of the power supply cord unless otherwise indicated.
File E214180 Vol. 1 Sec. 16 and Report Page 2A Issued: New: 2007-10-02 2019-01-31 ELECTRICAL CONNECTIONS: Unless otherwise stated, all electrical connections are arranged and located as specified in the Sec. Gen. The connector identifications and connector/insulator materials are as noted below.
File E214180 Vol. 1 Sec. 16 and Report Page 3 Issued: 2007-10-02 MARKINGS AND INSTRUCTIONS: See Section General for other required Markings and Instructions. User Microwave Caution Markings - A legible, permanent type marking containing the specific wording noted in Section General is provided. The title is emphasized (bold print, contrasting color, etc.) to elicit the attention of the user.
File E214180 Vol. 1 Sec. 16 and Report Page 4 Issued: Revised: 2007-10-02 2013-09-13 Switch and Fuse Label - These labels, as specified in the Report, are located near each component on the oven chassis inside of the appliance enclosure, where readily visible before any servicing operation. INSTRUCTIONS *User Instructions - A user/operator manual is provided with each oven detailing the proper use, care and maintenance of the appliance.
File E214180 Vol. 1 Sec. 16 and Report Page 5 Issued: Revised: MODEL EM720C##, E(A)M720C##-PM, E(A)M820C##-PM - FIG. 1, 1-1 2007-10-02 2014-07-31 ,1A, AND 1B General - Fig. 1 shows the front view of the Model EM720C## and Fig. 1-1 shows the left side view of the Model EM720C##. Represents all models unless otherwise indicated. Fig. 1A and Fig. 1B show the right side view of Models E(A)M720C##-PM and E(A)M820C##-PM. 1. Door Assembly - Secured by door hinges. assembly descriptions.
File E214180 *6. Vol. 1 Sec. 16 and Report Page 5-1 Issued: Revised: 2007-10-02 2019-01-31 Control Panel – R/C (QMFZ2), ABS, LG Chemical Ltd.(E67171), Type AF305 or AF305HT rated 5VA, 85 oC, min 2.5 mm thick. Measures 238 mm high by 84 mm wide. Secured to the Oven Cavity Front Plate by integral tabs and screw. Alternate – Same as above except LG CHEMICAL LTD (E67171), Type AF303S, rated 5VA, 85oC, minmum 2.5 mm thick.
File E214180 Vol. 1 Sec. 16 and Report Page 5A Issued: Revised: 2007-10-02 2011-12-16 MODELS E(A)M820C##, E(A)M820C##-PM General - Models E(A)M820C## and E(A)M820C##-PM are identical to model E(A)M720C## except as described below. 1. Electronic Controller Assembly – GUANGDONG MIDEA MICROWAVE AND ELECTRICAL APPLIANCES MFG CO LTD. Model MD1001L or MD1001LS, MD1001LSB, power control PWB. Refer to file E214180, Vol. 3. Sec. 5 for additional details.
File E214180 Vol. 1 Sec. 16 and Report Page 6 Issued: Revised: 2007-10-02 2013-08-06 MODEL MM720C## - FIG. 2 MODEL MM720C##-PM - FIG. 2A General - These figures are a front view of the subject unit. MM720C## is identical to model EM720C## except as described below. MM720C## is identical to Model E(A)M720C##-PM except as described below. Also represents other models unless otherwise specified. 1. Mechanical Controller Assembly - R/C (WGZR2 / 8), Yuyao Jing Cheng High & New Tech. Co., Ltd.
File E214180 Vol. 1 Sec. 16 and Report Page 7 Issued: Revised: 2007-10-02 2017-10-27 FRONT VIEW MODEL EM720C## WITH DOOR OPEN - FIG. 3 and 3A General - Shows view of Model EM720C## with the door open. Represents all models unless otherwise indicated. 1. Microwave Guide Inlet Opening - Inlet opening measures 86 mm wide by 39 mm high, located on the cavity right side wall. Provided with a mica, measured 64 mm by 116 mm, min 0.35 mm thickness. Secured by integral tabs to cavity.
File E214180 7. Vol. 1 Sec. 16 and Report Page 7-1 Issued: New: 2007-10-02 2017-10-27 Oven Cavity Front Plate - Steel, epoxy painted or stainless 0.5 mm thick. Secured to oven cavity by spot welding. Two interlock actuator openings are provided on right of the plate. Overall dimensions Front Plate Dimensions (in) Width 431 8. Height 235 Interlock Actuator Openings - Two openings provided for the engagement of the interlock actuators. Located on the right of the oven cavity front plate.
File E214180 Vol. 1 Sec. 16 and Report Page 7A Issued: Revised: 2007-10-02 2017-10-27 FRONT VIEW MODEL E(A)M720C##-PM WITH DOOR OPEN - FIG. 3B, 3C AND 3D General - FIG. 3B shows the front view of Model E(A)M720C##-PM with the door open. Fig. 3B is identical to Fig. 3 except the below items. 1. Microwave Guide Inlet Opening - Inlet opening measures 86 mm wide by 47 mm high, located on the cavity right side wall. Provided with a mica, measured 64 mm by 116 mm, min 0.35 mm thickness.
File E214180 Vol. 1 Sec. 16 and Report Page 7B Issued: New: 2007-10-02 2010-12-11 FRONT VIEW MODEL E(A)M820C##-PM WITH DOOR OPEN - FIG. 3E AND 3F General - FIG. 3E shows the front view of Model E(A)M820C##-PM with the door open. Fig. 3E is identical to Fig. 3B except the left side openings shown in Fig. 3F. 1. Ventilation Openings - A series of openings measuring 3.0 mm diameter each, located in cavity left side wall. For details, refer to Figs. 3F.
File E214180 Vol. 1 Sec. 16 and Report Page 7C Issued: Revised: 2007-10-02 2013-08-06 FRONT VIEW MODEL MM720C##-PM WITH DOOR OPEN - FIG. 3G General - Fig. 3G shows the front view of Model MM720C##-PM with the door open. Model MM720C##-PM is identical to E(A)M720C##-PM except the below items. Also represents other models unless otherwise specified. 1. Ventilation Openings - A series of openings measuring 3.0 mm diameter each, located in cavity left side walls. For details, refer to Fig. 3G.
File E214180 Vol. 1 Sec. 16 and Report Page 7D Issued: Revised: 2007-10-02 2013-08-06 ALTERNATE FRONT VIEW OF MODELS E(A)M820C##-PM AND MM720C##-PM WITH DOOR OPEN FIGS. 3H AND 3I General - Models E(A)M820C##-PM and MM720C##-PM employ the alternate cavity openings as below. Fig. 3H shows the front view with the door open of Models E(A)M820C##-PM and MM720C##-PM with alternate cavity openings. Fig. 3H is identical to Fig. 3 (Compares to Fig.
File E214180 Vol. 1 Sec. 16 and Report Page 8 Issued: Revised: 2007-10-02 2015-01-05 TOP VIEW OF MODEL EM720C## WITHOUT COVER - FIG. 4 General - Shows top view of the unit with outer enclosure removed. Represents all models unless otherwise indicated. 1. Oven Cavity Thermostat - R/C (XAXP2/8), CHANGSHU XIN DU AN ELECTRIC CO LTD, Type KSD1-90, rated 125 V, 15 A. (E186242, dated 1997-11-15) temperature limiting type, calibrated to open at 90 C. Secured to the top of the cavity by screws.
File E214180 Vol. 1 Sec.
File E214180 4. Vol. 1 Sec. 16 and Report Page 9 Issued: Revised: 2007-10-02 2015-01-05 Fuse - R/C (JDYX2/CN), miscellaneous type fuse, Cat. No. 6G, (E166522) rated 125 V ac, 20 A. Mounted in two metal clips secured to the PWB on the noise filter. Alternate – Same as above except R/C (JDYX2/8), DONGGUAN BETTER ELECTRONIC TECHNOLOGY CO LTD (E300003). Cat. No. 6112150, rated 125 Vac, 15 A or Cat. No 6112200, rated 125Vac, 20A.
File E214180 Vol. 1 Sec. 16 and Report Page 9A Issued: Revised: 2007-10-02 2015-01-05 MODELS E(A)M820C##-PM – FIG. 4A General - E(A)M820C##-PM is identical to model E(A)M720C## except as described below. 1. Oven Cavity Thermostat – (For Model E(A)M820C##-PM only) R/C (XAXP2/8), CHANGSHU XIN DU AN ELECTRIC CO LTD, Type KSD1-110, rated 125 V, 15 A. (E186242, dated 1997-11-15) temperature limiting type, calibrated to open at 110C. Terminals of unit are insulated upon connection of mating terminal.
File E214180 Vol. 1 Sec. 16 and Report Page 10 Issued: Revised: 2007-10-02 2019-04-09 SIDE VIEW OF MODEL EM720C## WITHOUT COVER - FIG. 5 General - Shows right side view of the unit with the enclosure removed. Represents all models unless otherwise indicated. 1. Cooling Fan - (Not shown) R/C (XEIT2/8), , Yuyao Jing Cheng High & New Technology Co Ltd, Type YJF62A-120, rated 120 V, 60 Hz, Class B, lockedrotor temperature at 175 C (E199578).
File E214180 4. Vol. 1 Sec. 16 and Report Page 10A Issued: Revised: 2007-10-02 2019-04-09 Oven Lamp and Lamp holder - R/C (OMTT2/8), SHANGHAI SHENGXIONG ELECTRICAL APPLIANCE MFY CO LTD (E306254), Model F-E17-1, rated 250V, 75W, 150C. Secured to oven frame by steel tabs and prevented from moving by integral steel tabs. Lamp is not accessible to the user and can only be replaced by service personnel. Alternate – Same as above except for R/C (OMTT2/8), Yuyao Jiahong Electric Appliances Co., Ltd.
File E214180 6. Vol. 1 Sec. 16 and Report Page 11 Issued: Revised: 2007-10-02 2019-01-31 High Voltage Diode - Nan Tong Gaoxing Electronics Co.,Ltd, Type CL01-12, Rated 12 KV minimum, 350 mA, 130C. Integral leads are copper alloy, un-insulated. High voltage lead terminates in a plated copper alloy, quick-connect terminal with detent locking action. Ground lead provided with closed-loop crimped type connector, which is secured to side metallic barrier by screw. Diode held in place by rigidity of leads.
File E214180 *11. Vol. 1 Sec. 16 and Report Page 12 Issued: Revised: 2007-10-02 2015-01-05 High Voltage Transformer – (For model EM720C## and AM720C##)Transformer Model MD-601AMR-1, rated 120 V, 60 Hz, designated BWL-R (E306927), provided with Recognized Component insulation system(OBJY2) Class 220 (R) by GUANGDONG MIDEA KITCHEN APPLIANCES MFG CO LTD. Transformer Model MD-601AMR-1 Core Dimensions, (mm) 57 by 71.5 by 86 Transformer Winding Diameter, (mm) Primary Secondary 1.2 mm/0.85 ohm 0.
File E214180 Vol. 1 Sec. 16 and Report Page 13 Issued: Revised: 2007-10-02 2017-10-27 Alternate – For model MM720C## only Transformer Model MD-701AMR-1, rated 120 V, 60 Hz, by GUANGDONG MIDEA KITCHEN APPLIANCES MFG CO LTD, provided with Recognized Component insulation system(OBJY2), designated, BWL-R(E306927), Class 220 (R) by GUANGDONG MIDEA KITCHEN APPLIANCES MFG CO LTD. Transformer Model Core Dimensions, (mm) MD-701AMR-1 62 by 76.5 by 90 Transformer Winding Diameter, (mm) Primary Secondary 1.
File E214180 Vol. 1 Sec. 16 and Report Page 13A Issued: Revised: 2007-10-02 2015-01-05 MODELS E(A)M820C##, E(A)M820C##-PM General - Models E(A)M820C## and E(A)M820C##-PM are identical to model E(A)M720C## except as described below. 1. Magnetron - Cat. No. 2M219J manufactured by WITOL. See File E214180, Vol. 1, Sec. 7, Page 14, Report dated 2004-02-20 for details. Grounding continuity maintained by positive metal to metal contact between magnetron fram and wave guide.
File E214180 Vol. 1 Sec. 16 and Report Page 13B Issued: Revised: 2007-10-02 2019-01-31 SIDE VIEW OF MODELS E(A)M720C##-PM, E(A)M820C##-PM WITHOUT COVER - FIG. 5A, 5B General – Fig. 5A shows right side view of the Model E(A)M720C##-PM with the enclosure removed. Fig. 5B shows right side view of the Model E(A)M820C##-PM with the enclosure removed. Figs. 5A & 5B are identical to Fig. 5 except as described below. *1.
File E214180 Vol. 1 Sec. 16 and Report Page 13C Issued: Revised: 2007-10-02 2015-01-05 SIDE VIEW OF MODELS MM720C##-PM WITHOUT COVER - FIG. 5C General – Fig. 5C shows the right side view without outer enclosure for Model MM720C##-PM. MM720C##-PM is identical to E(A)M720C##-PM except for the following items. Also represents other models unless otherwise specified. 1. Oven Cavity Thermostat - R/C (XAXP2/8), CHANGSHU XIN DU AN ELECTRIC CO LTD, Type KSD1-110, rated 125 V, 15 A.
File E214180 Vol. 1 Sec. 16 and Report Page 14 Issued: Revised: 2007-10-02 2016-04-13 REAR VIEW, MODEL EM720C##, E(A)M720C##-PM, E(A)M820C##-PM - FIG. 6 AND 6A General - Fig. 6 shows the rear view of the Model EM720C##. Represents all models unless otherwise indicated. Fig. 6A shows the rear view of the Models E(A)M720C##-PM and E(A)M820C##-PM. 1. Rear Enclosure – Painted steel, 0.5 mm thick. Secured to oven cavity and bottom enclosure by either riveting, spot-welding, or by screws.
File E214180 Vol. 1 Sec. 16 and Report Page 14A Issued: Revised: 2007-10-02 2010-12-11 REAR VIEW, MODELS E(A)M820C## and E(A)M820C##-PM *General - Models E(A)M820C## and E(A)M820C##-PM are identical to model E(A)M720C## except as described below. 1. Power Supply Cord and Plug – Listed, flexible cord, Type SPT-2, 3conductor jacketed, 16 AWG, rated 105 C and terminated in a three-prong grounding-type attachment plug. Overall length of cord may vary from 1 m to 2.
File E214180 Vol. 1 Sec. 16 and Report Page 15 Issued: Revised: 2007-10-02 2013-08-06 BOTTOM VIEW - MODELS EM720C##, E(A)M720C##-PM, MM720C##-PM, E(A)M820C##-PM FIG. 7 AND 7-1, 7B General – Fig. 7 shows the bottom view of the Model EM720C##. Represents all models unless otherwise indicated. Fig. 7-1 shows the bottom view of the Models E(A)M720C##-PM and E(A)M820C##-PM. Fig. 7B shows the bottom view of Models E(A)M720C##-PM, MM720C##-PM and E(A)M820C##-PM.
File E214180 Vol. 1 Sec. 16 and Report Page 15A Issued: New: 2007-10-02 2008-10-30 Alternate BOTTOM VIEW - MODELS E(A)M720C## - FIG. 7A General – Fig. 7A shows the alternate bottom view of MODELS E(A)M720C##. Fig. 7A was the same as Fig. 7 except following item. 1. Air Exhaust Openings – For the details of different openings from Fig. 7, measured min. 4.9 OD, refer to Fig. 7A.
File E214180 Vol. 1 Sec. 16 and Report Page 16 Issued: Revised: 2007-10-02 2019-01-31 DOOR ASSEMBLY EM720C## - FIG. 8 General - This figure shows the door assembly. unless otherwise indicated. 1. Represents all models Outer Viewing Screen – Reinforced PET film, 0.25 mm thickness measuring 259 mm by 175.5 mm. Secured to Outer Door Fame by plastic tab. Manufactured by Shanghai Huazhou Fangyin Packing Material Company. Alternate – Same as above except Glass of 0.3 mm thick with various shapes. 2.
File E214180 Vol. 1 Sec. 16 and Report Page 17 Issued: Revised: 2007-10-02 2014-11-11 Alternate Construction - MODELS E(A)M820C##, E(A)M820C##-PM – Fig. 8A General – Models E(A)M820C## and E(A)M820C##-PM employ the alternate construction as below. Fig. 8A shows the top view of the Model E(A)M820C##-PM with outer enclosure removed. *1.
File E214180 Vol. 1 Sec. 16 and Report MODEL E(A)M720D## Page 18 Issued: Revised: 2007-10-02 2016-04-13 FIGS. 10, 11, 11A 11B & 11C General – Fig. 10 shows the bottom view, Fig. 11 shows the top view without top enclosure, Fig. 11A shows the internal left side view and Fig. 11B shows the internal right side view of Model E(A)M720D##. Fig. 11C shows the intended securement locations of Magnetron Thermostat Metal Support.
File E214180 *4. Vol. 1 Sec. 16 and Report Page 19 Issued: Revised: 2007-10-02 2015-01-05 High Voltage Transformer – Model MD-701AMR-3, rated 120 V, 60 Hz, Class 220(R), provided with Recognized Component insulation system, Designate BWL-R(OBJY2), Class 220 (R) by GUANGDONG MIDEA KITCHEN APPLIANCES MFG CO LTD (E306927). Transformer Model MD-701AMR-3 Core Dimension, (mm) 76.5 by 66 by 90 Transformer Winding Diameter, (mm) Primary Secondary 1.4 mm/0.52 ohm 0.
File E214180 5. Vol. 1 Sec. 16 and Report Page 20 Issued: Revised: 2007-10-02 2015-01-05 Control PWB Assembly – Model EMXAAGK, consists of below components. The control is programmed to provide continuously 100% of full power during microwave oven operation. See Ill. 6 for circuit diagram and trace layout with Class 2 Transformer and Ill. 6A for circuit diagram and trace layout with Class 2 Power Supply. a. Class 2 Transformer - Unlisted Component (XOKV3/9), Model PT6329B.
File E214180 Vol. 1 Sec. 16 and Report Page 20-1 Issued: Revised: 2007-10-02 2015-01-05 Alternate – Same as above except for R/C (NLDX2/8), YUEQING MEISHUO ELECTRIC CO LTD (E358149), Type MPD-S-112-A, rated 250 Vac, 10 A. Alternate – Same as above except for R/C (NLDX2/8), DONGGUAN CHUROD ELECTRONICS CO LTD (E341422), Type A1-V-112HA, rated 250 Vac, 10 A or 125/250 Vac, 1/6 HP.
File E214180 10. Vol. 1 Sec. 16 and Report Page 20A Issued: Revised: 2007-10-02 2015-05-14 Oven Cavity Thermostat - R/C (XAXP2/8), CHANGSHU XIN DU AN ELECTRIC CO LTD, Type KSD1-110, rated 125 V, 15 A. (E186242, dated 1997-11-15) temperature limiting type, calibrated to open at 110C, close at 0C. Secured to upper part of oven and prevented from moving by screws. The center of Oven Cavity Thermostat is located at the Cavity right side edge and 66 mm from Rear Enclosure.
File E214180 15. Vol. 1 Sec. 16 and Report Page 20A1 Issued: Revised: 2007-10-02 2015-11-02 Steel Air duct – Steel. Measured 0.5 mm thick, overall 80 by 67 by 46 mm. Secured to Oven Cavity top side by integral steel tabs and a screw. Alternate – Same as above except measured 0.4 mm thick, overall 73 by 67 by 46 mm. 16.
File E214180 Vol. 1 Sec. 16 and Report Page 20B Issued: New: 2007-10-02 2012-11-08 ALTERNATE CONSTRUCTION FOR MODEL E(A)M720D## – FIG. 11D General – Fig. 11D shows the alternate construction for Model E(A)M720D##. It’s identical to the previous construction of E(A)M720D## described in Figs. 10, 11, 11A, 11B, 11C except for the following items. 1.
File E214180 Vol. 1 Sec. 16 and Report Page 21 Issued: Revised: 2007-10-02 2019-01-31 Alternate Construction - MODEL E(A)M720C##-PM – FIG. 12, 13, 14, 15 General – Model E(A)M720C##-PM employs the alternate construction as below. Fig. 12 shows top view of the unit with outer enclosure removed and Fig. 13 shows right side view of the unit with the enclosure removed. Fig. 14 shows left side view of the unit with the enclosure removed. Fig. 15 shows the front view with door open. 1.
File E214180 6. Vol. 1 Sec. 16 and Report Page 22 Issued: Revised: 2007-10-02 2015-01-05 Steel Air duct – Steel. Measured 0.5 mm thick, overall 80 by 67 by 46 mm. Secured to Oven Cavity top side by integral steel tabs and a screw. Alternate – Same as above except measured 0.4 mm thick, overall 73 by 67 by 46 mm. 7. Magnetron Thermostat Metal Support – (Optional; Employed when the optional Magnetron Thermostat is employed) Steel, measured 45 mm by 38 mm by 5 mm height, 0.5 mm thick.
File E214180 Vol. 1 Sec. 16 and Report Page 22A Issued: Revised: 2007-10-02 2017-10-27 ALTERNATE CONSTRUCTION FOR MODEL E(A)M720C##-PM – FIG. 15A General – Fig. 15A shows the alternate construction for Model E(A)M720C##-PM. It’s identical to the previous construction of E(A)M720C##-PM described in Figs. 12, 13, 14, 15 except for the following items. 1.
File E214180 4. Vol. 1 Sec. 16 and Report Page 22A1 Issued: New: 2007-10-02 2015-11-20 Cooling Fan Motor – R/C (XEIT2/8), GUANGDONG MIDEA MICROWAVE AND ELECTRICAL APPLIANCES MFG CO LTD (E305803), Model YZ-A6118-M, Rated 120 V, 60 Hz, Class B. Press fits into integral Thermoplastic Cooling Fan Support and secured by two screws. (Engineering Note: maximum evaluated lock rotor temperature is 165.
File E214180 Vol. 1 Sec. 16 and Report Page 22B Issued: Revised: 2007-10-02 2015-11-20 ALTERNATE CONSTRUCTION FOR MODEL E(A)M720C##-PM – FIGS. 15B & 15C General – Model E(A)M720C##-PM employs the alternate construction as below. Fig. 15B shows the rear view and Fig. 15C shows the bottom view. It’s identical to the previous construction of E(A)M720C##-PM described in Fig. 15A except for the following items. 1. Rear Enclosure – Painted steel, 0.5 mm thick.
File E214180 Vol. 1 Sec. 16 and Report Page 23 Issued: New: 2007-10-02 2011-08-26 ALTERNATE CONSTRUCTION - MODEL E(A)M720D## – FIGS. 16 & 17 General – Model E(A)M720D## employs the alternate construction as below. Fig. 16 shows the front view with door open and Fig. 17 shows the left side view of the unit with the enclosure removed. 1. Oven Lamp and Air Inlet Opening - A series of holes measuring 3.0 mm diameter each, located in the cavity right side wall.
File E214180 Vol. 1 Sec. 16 and Report Page 23A Issued: Revised: 2007-10-02 2015-11-10 ALTERNATE CONSTRUCTION FOR MODEL E(A)M720D## – FIGS. 17A & 17B General – Model E(A)M720D## employs the alternate construction as below. Fig. 17A shows the rear view and Fig. 17B shows the bottom view. It’s identical to the previous construction of E(A)M720D## described in Figs. 16 & 17 except for the following items. 1. Rear Enclosure – Painted steel, 0.5 mm thick.
File E214180 Vol. 1 Sec. 16 and Report Page 24 Issued: Revised: 2007-10-02 2016-04-13 MODEL EM720D##-P0 – FIGS. 18 &19 General – Fig. 18 shows the top enclosure view Fig. 19 shows the top view with enclosure removed. Model EM720D##-P0 employs the same construction as EM720C##-PM described in Fig. 15A except as specified below. 1. Left Side Mounting Lever – Metal plate. Minimum 1.0 mm thick, overall measure 189 mm by 26 mm. Mechanically secured to Oven Cavity front plate. 2.
File E214180 Vol. 1 Sec. 16 and Report Page 25 Issued: New: 2007-10-02 2015-05-14 ALTERNATE CONSTRUCTION - MODEL MM720C##-PM – FIGS. 20 & 21 General – Model MM720C##-PM employs the alternate construction as below. Fig. 20 shows the rear view and Fig. 21 shows the bottom view. 1. Rear Enclosure – Painted steel, 0.5 mm thick. Secured to oven cavity and bottom enclosure by either riveting, spot-welding, or by screws. Measures approximately 432 mm wide by 236 mm high.
File E214180 Vol. 1 Sec. 16 and Report Page 26 Issued: New: 2007-10-02 2015-05-22 ALTERNATE CONSTRUCTION - MODEL EM720D##-P0 – FIGS. 22 & 23 General – Model EM720D##-P0 employs the alternate construction as below. Fig. 22 shows the rear view and Fig. 23 shows the bottom view. It’s identical to the previous construction of EM720D##-P0 described in Figs. 18 & 19 except for the following items. 1. Rear Enclosure – Painted steel, 0.5 mm thick.
File E214180 Vol. 1 Sec. 16 and Report Page 27 Issued: New: 2007-10-02 2017-05-27 ALTERNATE CONSTRUCTION - MODEL E(A)M820C##-PM – FIGS. 24, 24A, 24B & 25 General – Model E(A)M820C##-PM employs the alternate construction as below. It’s identical to the original construction of E(A)M820C##-PM described in this report except for the following items as shown in Fig. 24 for the oven cavity view with door opened, Fig. 24A for the internal right view & Fig. 24B for the inside top view; and Fig.
File E214180 Vol. 1 Sec. 16 and Report Page 28 Issued: New: 2007-10-02 2017-05-27 Alternate - Same as above except CHANGSHU XIN DU AN ELECTRIC CO LTD (E186242), Type KSD1-160, rated 125V, 15A, limiting type. Alternate - Same as above except R/C (XAPX2/8), Honest-Well Co., Ltd. (E192925), type T24A160 series, rated 125V, 15A, limiting type. Alternate - Same as above except, Foshan Tianpeng Thermostats Co., Ltd(E202192), Model KSD201, rated 125V, 15A, limiting type.
