Quick Installation Guide

Note:
A. Connect to the computer through Modem (cat), use the
computer broadband connection to dial, here must choose
"broadband connection";
B. Connect the line from the router or switch to the Internet.
Here, select the name of the interface card corresponding to
the local connection (usually the default);
C. If the wireless network card that comes with the notebook
is connected to the wireless network, select the name of the
interface card of the wireless network card;
D. If you use the 4G network card to access the Internet, select
the interface card name of the 4G network card.
4.Click "ICS" to select the network connected to your computer,
click , as shown below:
(Win7 system interface will be a bit different here, the setting
method is the same)
Application
REALTEK 11n USB Wireless LAN Utility
Refresh（R）
About（A）
General
ICS
MyComputer
Realtek RTL
Advanced
Statistics
Mode（M）
Application
Set up Internet connection sharing（ICS）
ConnName
Device name
WiFi connection 4 11b/g Wireless LAN Mini PCI
Express Adapter III
5.Set it according to your network type and select the network you
are using. If the network is bound to IP address and MAC address
or is restricted to use by a single computer, it can not share the
network.
If the setting is not successful, please share the network manually
(see Setting up a network share manually).