Quick Installation Guide

2.After switching to access point mode, the SSID displays the name
of the computer, as shown below:
Note: The default of the computer name is WiFiSSID.
The default is no password. If you need to use the password
and change the SSID, please see the following operations.
3.Click on the image above to open the Wireless Network
Properties Settings dialog to set the network name (SSID), channel,
encryption algorithm and password. Click
OK
REALTEK 11n USB Wireless LAN Utility
Refresh（R）
About（A）
General
ICS
MyComputer
Realtek RTL
Advanced
Statistics
Mode（M）
SSID：
BSSID：00:0D:B1:A2:0B:D1
Association Table
Configuration
AID
MAC Address
Period of use
Configuration
Wireless Network Properties：
Wireless network security
This network requires a key for the following：
Network Authentication： WPA2-PSK
Data encryption： AES
Network key：
Confirm network key：
************
************
OK
Cancel
Network name (SSID)： COMFAST_AP
Channel： 6（2437MHz）