Instruction Manual

10
● Be sure to carefully check all safety and environmental conditions.
● A minimum of five (5) wraps of wire rope wound around the drum is necessary.
● A wire rope should be discarded and not be used again if rope shows sign of excessive wear,
too many broken wires, corrosion or other defects.
● Make sure to connect the main power source and grounding.
● It’s not safe to lift loads exceeding the rated load.
● Connect power source at rated voltage. It will cause maladjusted working if input voltage
falls out of rated voltage by +/- 5%
V. Working Method
Preparation before Working
To lift a load, press ↑ button and drum will rotate as shown below.
To lower a load, press ↓ button and drum will rotate as shown below.
To stop winching, release ↑or ↓ button.
To have an emergency stop function, press the emergency stop button (option). Rotate the
button clockwise for returning.
Up and Down Switching
Pendant Switch Type
Pendant Switch Rated Amp. Contacts Remarks
CPB-313 16A 2a1b Standard
PB-317 16A 2a1b + Emergency Stop 1a1b Option
Up
button
Down
button
Emergency stop
button