Product Manual

Maintenance and Storage

Maintenance Mode

Before performing any maintenance on the pressure washer, it must be placed in maintenance mode.

1.) Turn off motor and unplug cord.

2.) Turn off water supply.

3.) Squeeze trigger to relieve system pressure.

Maintenance Schedule

What to Check

When to Check

What to Do

Inlet Filter

Each Use

Visually inspect and clean inlet filter with clear water.

Pressure Hose

Each Use

Visually inspect pressure hose and hose couplings. Replace hose if

any of the following is evident:

hose coupling is damaged, wire mesh is exposed or damaged, hose

is permanently kinked or flattened, outer hose cover is blistered or

loose.

Bolts

Each Use

Tighten any loose bolts.

Pump Oil

After 1

50hrs,

then 3mo/500hr

Change pump oil. See pump oil change instructions on next page.