User guide

CIF Module - SimpleVSP
74 CoMET Version 5.9 – Tutorial
Obtaining a Value Change Dump
The standard VCD format output is a useful tool for analysis. To obtain a VCD:
 Choose Tools/VCD Configuration
 Check Enabled and specify the Location of the vcd file to be saved.
Enabling Bus Monitoring
CoMET by default dumps all port and net changes to the VCD file, however no bus
information is dumped unless bus monitoring is enabled.
The interesting events in our simulation happen on the bus, so we wish to enable bus
monitoring.
 Open SimpleVSP1.pcx in XML Tree View
 Double click SimpleVSP1/Module Instances/ Top/VirtualPlatform1/StdBus1/Bus
Monitor
Platform Config dialog, Parameter Override tab, Properties panel:
 Override value: select Enabled
 Platform Config dialog: Click OK