User guide

CIF Module - SimpleVSP
24 CoMET Version 5.9 – Tutorial
• Using the Modules Window
• Adding ports and nets
• Connecting ports and nets
• Using table views of the .fmx file to verify connections and parameters
• Building the VirtualPlatform project
• Adding SimpleVSP1 module instances and connecting them
• Adding a target image to the VSP
• Building the SimpleVSP project
• Running the simulation
• Monitoring output and measuring performance
Prerequisites
This tutorial assumes:
 Comet 5 is installed and open.
 Either the Microsoft Visual C++ compiler or the gcc compiler is installed
 You are familiar with creating and navigating a workspace. These procedures are
covered in the preceding Hello World example
 You are familiar with writing and building target code for the microprocessor you will
use in this tutorial. Alternatively it is assumed you have access to someone who can
build the tutorial target code and provide a binary image.