Technical data
8
5 - PREPARING THE MACHINE
- The machines are equipped with handy carrying points.
- They are shipped from the factory in specic packaging.
- The machines are tested before delivery. Prior to using the machine and with
the engine off, always make sure the protective covers have not been tampered
with and that there is no evident damage.
5.1 FUELLING
Fuel: use unleaded petrol.
Oil: special synthetic oil at 1,5% (100 parts pet-
rol to 1,5 parts oil), which guarantees excellent
lubrication.
How to prepare the mixture: pour one litre of
petrol into the tank through the rear inlet marked
with the symbol
. Add the oil and then pour in
the remaining litre of fuel.
WARNING. Do not ll the tank right up to the
brim. Leave a small amount of air above the level of the fuel. Screw on the plug
and shake for 5 seconds, then unscrew the tank plug to relieve any overpressure
before screwing it back on again.
BEFORE USE:
1 - Unscrew the air tank plug and t the snor-
kel in its place.
WARNING. Make sure the snorkel is fully
tightened.
WARNING!!
Do not fully empty the can used for fuelling as
it may contain water.
Do not refuell while the machine is in the wa-
ter: even only a few drops of water in the fuel
tank can damage the carburettor and the en-
gine.