User manual

Alarm Input 4 ch 4 ch 4 ch

Alarm Output 1ch 1ch 1ch

PTZ RS485

HardDisk

Interface

1 SATA 2 SATA 2 SATA

Network

interface

RJ45 10M/100M self-adaptive Ethernet

USB Interface 2USB2.0 high-speed interface

Power 12 VDC

1.3

Open Case And Connect Cables

1.3.1 Open-case inspection

First of all, please check if there is apparent damage of the packing as soon as you received the

products. The material can protect from the damage very well in the transportation.

Secondly, take out the product, take away the protection film from the DVR to check if there is

damage.

Thirdly, open case, check if there is any loose of data cable of front panel, power cable, connection

between fan power and mother board

1. Front panel and rear panel

There are instructions of how to use keys on the front panel and the interfaces on rear panel

please check the model no. with the one you ordered.

As for the labels on the panel, please take good care of them, which is very important to our after-sale

service.

You need to offer the model no. and serial no. during the after-sale service.

2.After open case, need to check

Besides checking obvious damage, also need to check if there is any loose of front panel data

cable, connect between power and mother board

1.3.2 HDD Installation

Make sure to install the HDD when you first use it.