User manual
20
click" user management ".
Add user: input a new user name in the edit box and set up the operational authority. Choose in the
right check box, “
☑
” means the users can use it, “□” users cannot use it. Click the "set password " to
set the new password, or it can be the default password.
Delete user: delete the selected user(Note: except Admin, no user has the right to set up or delete other
users)
Edit user: edit the selected user (Note: except Admin, no user has the right to edit other user
permissions)
Set password : setup the user logging password.
After the setting, click "OK" to save and exit, or click "cancel" to exit without saving
3.8.4.2 HDD management
Click "HDD management"
Overwrite: “
☑
” earliest recording files will be covered when the disk is full, “□"shows not cover.
Format: “
☑
” means selected, “□” means not selected. when click "format", there will pop up a
confirmation section: click confirm to begin format, or click cancel to return the main interface.
3.8.4.3 System maintenance