User manual

19
In "system setup" menu , choose "PTZ setup" to enter it's setting interface.
Channel
：
chose the target channel by clicking select box.
Work mode: select disable or able to stop the alarm or start the alarm.
Alarm duration: set up alarm duration time.
Recording channel: select the target channel to make recording after alarm is triggered.
Alarm: “
☑
” enable alarm, “□” close alarm
Buzzer: “
☑
”start buzzer, “□” close buzzer
Copy to
：
select the channel and click "copy to" &
''ok " to copy the same setting to other channel. Or user can choose copy to "all" to
make all channel in same stetting . Click button "cancel", the setup information will be
non-saved but exit.
3.8.4 System tools
In main menu, choose "system tool" and enter it's setting interface. it includes four setting: user
management, HDD management, system maintenance and factory setting
3.8.4.1 User management