User manual

18
Copy to
：
select the channel and click "copy to" &
''ok " to copy the same setting to other channel. Or user can choose copy to "all" to
make all channel in same stetting . Click button "cancel", the setup information will be
non-saved but exit.
3.8.3.7 PTZ setup
Select ”PTZ setup” from “system setup” menu
Channel: chose the target channel by clicking select box
Protocol: support Pelco-D and Pelco-P. Select the same protocol as PTZ.
Device ID: choose the matched one of the PTZ
Parity check: choose the matched one of the PTZ
Copy to
：
select the channel and click "copy to" & ''ok
" to copy the same setting to other channel. Or user can choose copy to "all" to make all
channel in same stetting . Click button "cancel", the setup information will be
non-saved but exit.
3.8.3 8 Sensor setup