User manual

15
Select “record setup” in system setup.
Channel
：
chose the target channel by clicking the select box
Weekday : chose the correspond day as user's need, "ALL" means record all date.
Recording mode and time：in the time edit box, user can set different time with different recoding
mode . "Time " : in red color , "Motion": in green color , "Sensor": in yellow color ; “
☑
" means
selected, “□” means invalid. There is times status display which 0~24 hours for whole schedule.
Copy to
：
select the target channel on the right of "copy to "button ,click "copy to" & ''ok " then
system will set the current channel setup informations to other target video channel. Click button
"cancel", the setup informations is non-saved but to exit.
3.8.3.4 Network setup
Select “network setup” from “system setup” menu.
MAC address
：
device's MAC address
DHCP：select DHCP to get IP automatically. “
☑
”means works ；“□” means non-work
IP address
：
the IP address must be unique and cannot be in conflict with the host or work station
which on the same network segment
Subnet Mask
：
use for distinguish the network segment.
Gateway
：
need to set the gateway address to achieve communication between the different network
segments.
DNS address
：
after accessing network by connecting with PPPOE protocol, it can gain a dynamic
IP address .
Web port
：
this port number is used for IE browser visit ;default port is "80".