User manual

13
3.8.3.1 General setup
Choose the "General setup" and turn into it's setup interface.
Time
：
DVR preview time. Click“refresh” after setting, it will pop out " the recording will stop once
you modify the time", and save the setting.
Date Format: Y/M/D”、“D/M/Y”、“M/D/Y”
Auto Logout: DVR will log off if there is no operation within 10 minutes, it needs login again.
Key Buzzer
：
Enable: there is sound with the controller or pressing key on front panel; Disable:
without sound.
Language
：
There is multiple choice according to users, Chinese and English and so on.
Video Standard
：
PAL and NTSC are all available.
DVR ID
：
user can use this ID to control the DVR by remoter controller. The remote controller
should be correspond with the ID so that it can work. (Please refer to the instruction in
2.3)
After setting finished, click "ok", the information will be saved. Click "cancel" to exit without
saving.
3.8.3.2 Encode setup