Instruction manual

H264 Digital Video Recorder art. 49807
V1.5
29
SPECIFICATIONS
VIDEO
Signal Format NTSC or PAL (Auto detect)
Video Input Composite: 4 inputs, 1 Vp-p, auto-terminating, 75 Ohms
Monitor Outputs
Composite: One (BNC), 1 Vp-p, 75 Ohms
VGA: One (Auto detect)
Video Resolution
Composite: 720x480 (NTSC), 720x576(PAL)
VGA: 720x480@60Hz (NTSC), 720x576@75Hz (PAL)
Playback/Record Speed
(images per second)
120/120ips (NTSC), 100/100ips (PAL)
INPUTS/OUTPUTS
Alarm Input
4 TTL, NC/NO programmable, Threshold: >= 2.4VDC for NC and
<= 0.3VDC for NO, 0~3.3VDC
Alarm Output
1 relay output, terminal blocks, programmable as NC or NO, 2A@125VAC,
1A@30VDC
Alarm Reset In 1 TTL, terminal block
Internal Buzzer 80dB at 10cm
Network Connectivity 10/100 Base Ethernet
CONNECTORS
Video Input Composite: 4 BNC
Monitor Output
Composite: 1 BNC
VGA: 1 DB15
Alarms Terminal block
Ethernet Port RJ-45
RS-485 Serial Port Terminal block, telemetry control
USB Port 1 on front panel (2.0)
STORAGE
Primary Storage SATA hard disk drive
Secondary Storage USB hard disk or flash drive
GENERAL
Dimensions (W x H x D) 13.38 x 1.83 x 12.20 (340.0mm x 46.5mm x 310.0mm)
Shipping Dimensions
(W x H x D)
18.11 x 5.63 x 16.14 (460mm x 143mm x 410mm)
Unit Weight 6.67 lbs. (3.03kg)
Shipping Weight 9.88 lbs. (4.49kg)
Operating Temperature 41°F to 104°F (5°C to 40°C)
Operating Humidity 0% to 90% NON condensing
Power 100-240 VAC, 0.8-0.4A, 60/50Hz
Power Consumption Max. 20W
Approval FCC, CE, CB, UL*
* CAUTION: Risk of Explosion if Battery is replaced by an Incorrect Type. Dispose of Used Batteries According to the Instructions. This
equipment is indoor use and all the communication wiring are limited to inside of the building.
Specifications are subject to change without notice.