Instruction manual

User’s Manual

 OSD: Choose to enable or disable OSD (On Screen Display).

– None: Choose to not display OSD information.

– Camera: Choose to display camera title, recording status and PTZ icons on each camera screen.

– Status: Choose to display zoom, network connection, freeze, sequence and recycle icons, and date/

time information on the bottom of the screen.

– All: Choose to display both Camera and Status information.

NOTE: When enabling the VGA Enhancement function, the recording speed will decrease by half.

RECORD

 Recycle: Select to record over the oldest video data once all

available storage space has been used. When it is not selected,

the DVR stops recording once all available storage has been used.

 Codec: Choose to select a codec between MPEG-4 and H.264.

Selecting the new codec displays a message asking you to confirm

whether or not you want to restart the system because the system

must be restarted before applying the new codec and you will

lose all recording data.

 Resolution: Choose to set up the recording resolution.

 Event Record Dwell: Choose to set up the length of time to record for the associated event. Refer to

Event in this chapter for information regarding event recording.

 Schedule Type – None: Choose to not record.

 Schedule Type – Basic: Choose to set up recording settings for all camera channels at a time.

– Time Record ips/Quality: Choose to set up the recording speed/quality for time-lapse recording.

– Event Record ips/Quality: Choose to set up the recording speed/quality for event recording.

– Record Mode: Choose to set up the recording mode. ( : Time-lapse recording, : Event recording,

: Time-lapse & Event recording)

– Time Schedule: Choose to set up the recording schedule for time-lapse and event recording.

 Schedule Type – Advanced: Choose to set up recording settings for each camera channels.

– Auto Deletion: Adjust the length of time recorded data will be kept by using the bar. Selecting Never

will disable the Auto Deletion function. You can set the DVR to automatically delete video recorded

earlier than the user-defined period under three conditions: at midnight, whenever the system reboots

or whenever the user changes the Auto Deletion settings.

– No.: Indicates a schedule number. The higher the number is, the higher priority it has.

– Day: Choose the days that the recording will take place.

– Range: Set up the time range that the recording will take place.

– Mode: Choose the recording mode. ( : Time-lapse recording, : Event recording,

Time-lapse & Event recording)

– Channels: Choose which cameras will be recorded.

– Settings: Define the recording speed (ips: image per second) and quality for time-lapse and event

recording independently.

– : Choose to delete the recording settings.

– Add Schedule… – Choose to add a schedule. Up to 20 schedules can be registered.

CAUTION: When changing the codec all recording data is deleted before applying the

new codec. If you don’t want to delete the recording data, back up it using the clip-copy

function.