Instruction manual

H264 Digital Video Recorder art. 49807
7
To Enter Searching Mode
Pressing the MENU button in the playback
mode enters the Search mode and displays
the Search Menu. Selecting Exit Search
exits the search mode. Select the desired
search mode in the search menu.
 Go To the First: Select to go to the first recorded image.
 Go To the Last: Select to go the last recorded image.
 Slow Play: Select to play video at low speed (x1/2, x1/3, x1/4, x1/6, and x1/8)
 Date/Time Search
Changing the desired date and time to search for and clicking the Go button displays
the recorded image of that date and time. Pressing the (Play/Pause) button plays
the recorded video.
 Calendar Search
Days with recorded video on the calendar and hours in which video
was recorded on the timetable will be highlighted. Selecting the
desired date or time and clicking the GO button display the
recorded image of that date or time. Pressing the button plays
the recorded video.
If the DVR’s time and date have been reset to a time that is earlier
than some recorded video, it is possible for the DVR to have more
than one video stream in the same time range. In this case, select
the video stream you want to search in the Select a Segment
option. Refer to Appendix – Time Overlap for further information
on searching time-overlapped video streams.
 Event Search
Selecting the event log to search for displays the recorded image
of that event. Pressing the button plays the recorded video.
Refer to Chapter 3 – Configuration  Main Menu, RECORD
for further information on setting event recording.
Selecting Option… allows you to specify the event search
condition.
– From/To: Set up to designate a specific period of video to
search. Select Check Time Overlap and select one of the
overlapping start and stop time if the DVR’s date and time have
been reset and the DVR has more than one overlapping start
and stop time. Selecting First or Last searches video from the
first or to the last recorded images.
– Alarm-In, Motion or Video Loss: Select channels to include
specific event types in your search condition.