Operating instructions

60
Following is a brief description for each item:
 Device Name – any meaningful name for the (DVR) device.
 Address – IP address or URL domain name for the (DVR) device. It should be the same as the
IP address (for Static IP) or URL (for PPPoE) in Network Setup for the (DVR) device.
 Control Port – the control port for the (DVR) device. The default value is 67.

Data Port
– the data port for the (DVR) device. The default value is 68.
 User Name – the login user name for the (DVR) device. It must be in the list in Password
Setup for the (DVR) device. Please note that different levels of users have different available
operations.
 Password – the corresponding password for the login user name for the (DVR) device.
 Auto Connection – whether the user wants to connect automatically to this (DVR) device.
 Connected – whether this PC is connected with the (DVR) device now.
The other properties in the dialog are similar to those described in Chapter 6. Please refer to Chapter
6 for the detailed descriptions. Besides, the user can download/upload the configurations from/to
the connected DVR or open/save the configurations from/to the designated directory.
Click on this icon to call up remote Software Upgrade dialog. Please select the DVR device and
upgrade file in the PC and then click on Start button to start the software upgrade process. The
Upgrade status will be updated according to the progress. When the upgrade file is uploading, the
user may click on Stop/Close button to stop the upgrade process.
Note: There must be at least one formatted HDD in the DVR for the remote upgrade to
succeed. After the software in the DVR is upgraded, the DVR will restart immediately and the
PC will be disconnected from the DVR. Please do step 7 in Before Logging On and then re-run
the I.E. to connect to the DVR again.