Operating instructions

59
Alarm Out /
Alarm outputs 1-2 (GREEN for normal state, RED for triggered state) for the DVR. For
Administrator, click on any of these icons to control the corresponding alarm output from normal to
triggered or from triggered back to normal.
Click on this icon to call up Search-by-time dialog. Please select the time (Year, Month, Date, Hour,
and Minute) and recorded video/audio type (Alarm, Motion, Video Loss, and Normal) to search for
playback. Click on Search button to start the search of the recorded video/audio. (If it failed, the
result will be shown on the title of the dialog). Now, you may use the playback buttons to play the
recorded video/audio. Please note that there must be some cameras in playback mode for the
search to succeed.
Click on this icon to call up Search-by-event dialog. The event logs will be shown on the screen.
Please select the event type and source ID to search for the event logs. Click on Refresh, Up or
Down to update the event logs. Click on the desired event log to highlight and select it. Click on the
OK button to search the recorded video/audio for the highlighted event log. Now, you may use the
playback buttons to play the recorded video/audio.
Click on this icon to call up search-PC-video dialog. Please select the file and then click on Open.
Now, you may use the playback buttons to play the recorded video/audio in the file.
Click on this icon to show/hide full PTZ control panel. The user can click on the PTZ Panel (but
outside of any object in it) (to call up the Context menu) to move it.
Click on this icon to call up Setup dialog.