Operating instructions

52
 Source ID – the source which triggered the event. For Alarm, it’s the alarm input number; for
Motion and Video Loss, it’s the camera number. It’s used to filter the events to be shown in the
log list. Press ENTER or +/- to check/uncheck each item.
 Log List – the event logs according to the Event Type and Source ID selected. The user may (1)
press ENTER to enter Event Playback display of the selected event log in this list, (2) press
Play Button ( ) to playback it directly, or (3) press Copy Button ( ) to backup (copy)
the selected recorded video/audio to the connected backup device without playback. The
Backup display (described in Section 8.4) will be shown. Please note that this kind of backup
without playback is performed in the background and the user can still do almost all the
operations. Please refer to Section 8.5 Playback For Search By Event for the detailed operations
for event playback.
8.3 Search Archived Files
The screen for Search Archived Files is shown below:
The operations are as below:
 ▲▼◄►
Press these buttons to select the items.
 ESC
Press this button to escape from this screen and return to quad display.
Following is a brief description for each item and its specific operations:
 Backup Device – press ENTER to call up Backup Device dialog (if there’s no Backup device
connected).
 Disk Storage – to select the disk storage to search the archived files. Press +/- buttons to select
the available storage.