Operating instructions

51
8.2 Search By Event / Log Display
The screen for Search By Event - Log display, is shown below:
There are four different types of event logs, including Alarm, Motion, Video Loss and System.
Up to 1000 most recent event logs can be stored in the system.
The general operations are as below:
 ▲▼◄►
Press these buttons to select the items.
 ESC
Press this button to escape from this screen and return to quad display.
 MODE => Refresh
Press this button to refresh the log display. If there are new event logs after the screen is last
updated, the log list shown will be updated accordingly.

SEQ
=> Page Up
 X2 => Page Down
Press SEQ/X2 to Page Up/Down the Log display.
 Numeric (ENTER)
Press these buttons to select the display page of the event logs, the log list will also be updated.
(Please note that there are only 1/2/3/4 available for the keypad on the front panel.)
Following is a brief description for each item and its specific operations:

Event Type – the type of the events (Record, Alarm, Motion, Video Loss, System) to be
shown in the log list. The Event Type “System” includes all system related events, such as power
on/off and will not trigger recording. Press ENTER or +/- to check/uncheck the event type for
the log list.