Operating instructions

50
8.1 Search By Time
The screen for Search By Time is shown on the
right side:
The Status field will show the ‘Recorded from’
time based on the selected Video/Audio before
searching - alarm partition if any of Alarm,
Motion, or Video Loss, is checked and normal
partition if Normal is checked.
The general operations are as below:
 ▲▼
Press these buttons to select the items.
 ESC
Press this button to escape from this screen and return to quad display.

SEARCH / MODE
Press this button to start searching the recorded video/audio with the selected search time and
video/audio type for playback. The search result will be shown on the bottom of this dialog if it
failed. If there’s no camera in playback mode, all the cameras in the current split window
will be set to playback mode.
 Play Button ( )
Press this button to start playing the recorded video/audio with the selected search time and
video/audio type. The search result will be shown on the bottom of this dialog if it failed. If
there’s no camera in playback mode, all the cameras in the current split window will be set
to playback mode.
 Copy Button ( )
Press this button to backup (copy) the selected type of recorded video/audio starting from the
Search Time (described below) in the HDD to the connected backup device without playback.
The Backup display (described in Section 8.4) will be shown. Please note that this kind of
backup is performed in the background and the user can still do almost all the operations.
Following is a brief description for each item and its specific operations:
 Search Time – (Year, Month, Date, Hour, Minute) for the recorded video/audio. The playback
(or backup) will start from the time entered here when the user press the playback buttons (or
Copy button) later. Press +/- buttons to modify each item.

Video/Audio – (Alarm, Motion, Video Loss, Normal). Check the types of the recorded
video/audio you want to search for playback. Press ENTER or +/- to check/uncheck each item.