Operating instructions

49
Miscellaneous function specific operations:
Active function Operations Descriptions
Focus
+/-
ENTER
Focus far/near
Auto focus
Iris
+/-
Iris increase/decrease
Auto Pan (3)
+/-
ENTER
*
#
Auto pan speed is shown in parenthesis
Increase/decrease speed
Start/stop Auto Pan
Set start position
Set end position
SEQ (5 sec.)
+/-, NUMBER
ENTER
SEQ dwell time is shown in parenthesis.
If SEQ mode is on, the camera will goto
preset position 0-9 (or 1-10) sequentially.
Change dwell time
Start/stop SEQ mode, an asterisk (*) will
be shown if SEQ mode is on
Preset (1)
+/-, NUMBER
ENTER
Preset location is shown in parenthesis
Change Preset location
Set Preset location
Pan Speed (3)
+/-
Manual pan speed is shown in parenthesis
Increase/decrease speed
8. Search/Playback/Archive (Administrator, Supervisor)
There are three ways to search the recorded video/audio for playback:
(a) Search by time
(b) Search by event
(c) Search archived files
In quad display, press SEARCH button to call up Search Menu display as shown.
The user’s operations are described as the
followings:
 ▲▼
Press these buttons to change the highlighted item.
 ENTER
Press this button to enter the corresponding Search display of the highlighted item. The Search
displays and their operations are described in the following sections, followed by the playback
operations of the searched video/audio.
 ESC
Press this button to escape from Search Menu display and return to quad display.