Operating instructions

47
 Mail To #1-5 – the receivers’ e-mail addresses. The system can send the e-mails originated from
the triggered events to up to 5 different receivers. Please follow the Text Input method described
in Section 4.1 to modify these items.
 Attachment – attached picture for the e-mail sent. The value could be (N/A, Original picture,
QCIF picture). Press +/- buttons to change this item.
6.10.2 Advanced Network Setup
In Network Setup, press ENTER to call up Advanced Network Setup as shown when the
highlighted option is Adv..
The Advanced Network Setup allows the administrator to set advanced network parameters. If the
user is not familiar with network administration, please DO NOT modify the items in this
dialog.
The general operations are as below:
 ▲▼
Press these buttons to select the items.
 ESC
Press this button to escape from this screen and return to Network Setup display. If the Save
dialog is shown, press ENTER to exit and save, ESC to exit without saving.
Following is a brief description for each item and its specific operations:
 Control Port – the control port for remote access. The default value is 67. Please follow the
Text Input method described in Section 4.1 to modify this item.
 Data Port – the data port for remote access. The default value is 68. Please follow the Text
Input method described in Section 4.1 to modify this item.
 HTTP Port – the HTTP (web page) port for remote access. The default value is 80. Please
follow the Text Input method described in Section 4.1 to modify this item.
 WAP Picture qulity (this machine support cellular phone long range interview). Please press +/-.
The key changes initial value.
Note: If the new Control Port or Data Port is not available or accessible during remote access,
the system will reset the ports to their default values, i.e. 67/68.