Operating instructions

43
 Date – system date. Press +/- buttons to modify each of these items.
 Time – system time. Press +/- buttons to modify each of these items.
 Display Format – format used for the system time displayed on the lower-left corner of the
main screen. Press +/- buttons to select the desired format.
 Language – press +/- buttons to select the language for the system. The languages supported
include: English, Russian, Simplified Chinese, Italian, etc.
6.9 RS-232/422/485 Setup
In Setup Menu display, press ▲▼ to change the highlighted option to RS-422/485 and then press
ENTER
to call up RS-422/485 Setup as shown.
The RS-422/485 Setup allows the administrator to setup RS422 or RS-485 control port. Please refer
to the manuals for the connected devices - PTZ cameras – to set these items in RS-422/485 Setup.
The general operations are as below:
 ▲▼◄►
Press these buttons to select the items.
 ESC
Press this button to escape from this screen and return to Setup Menu display. If the Save dialog
is shown, press ENTER to exit and save, ESC to exit without saving.
Following is a brief description for each item and its specific operations:
 Device Type – PTZ or N/A (Not Available). Press +/- buttons to change the type. Please note
that PTZ can only be selected for RS-485.
 Model – PTZ model of the connected devices. The PTZ models supported include Pelco D
protocol Dome and SamSung SCC-641P. Press +/- buttons to change the supported model
(or protocol).
 Baud Rate – press +/- buttons to change the value.