Operating instructions

 Level – the password level (Administrator, Supervisor or Operator) for this user. Press +/-

buttons to change the level.

6.8 System Setup

In Setup Menu display, press ▲▼ to change the highlighted option to System and then press

ENTER to call up System Setup as shown.

The System Setup allows the administrator to set the system time, time zone, time synchronization,

language, etc.

The general operations are as below:

 ▲▼◄►

Press these buttons to select the items.

 ESC

Press this button to escape from this screen and return to Setup Menu display. If the Save dialog

is shown, press ENTER to exit and save, ESC to exit without saving. Please note that if the

selected language is changed, the user will be asked to reboot the system for the newly

selected language to take effect.

Following is a brief description for each item and its specific operations:

 Time Zone – press +/- buttons to select the time zone for the system.

 Daylight Saving Time – press ENTER or +/- to check/uncheck this item. The default value is

set by selecting a different time zone, but the user may check/uncheck this item if the default

setting is checked.

 System Time



Synchronization – time synchronized with TSP Server or not. Press ENTER or +/- to

check/uncheck this item. The default setting is “–

––

–” - unchecked.



TSP Server – TSP (Time Synchronization Protocol) server name if Time Synchronization is

enabled. The system will try to do time synchronization with the specified TSP server at the

system preset interval. Please follow the Text Input method described in Section 4.1 to

modify this item.