Operating instructions

31
 E-mail – to send the event e-mail to remote station or not. The e-mail will be sent to the
predefined receivers at the moment when the event is triggered. Press ENTER or +/- to
check/uncheck this item. The default setting is “–
––
–” - unchecked.
6.2.2 Motion Setup
In Camera Setup, press ENTER to call up Motion Setup as shown when the highlighted option is
Motion Settings.. of the camera to setup. The Motion setup allows the administrator to define how
the system responds to the detected motion for the camera.
The general operations are as below:
 ▲▼
Press these buttons to select the items.
 Numeric
Press these buttons to select the camera.

COPY
( )
Press this button to copy the Motion settings, including Detection settings, of the focus camera to
all the following cameras. (i.e. focus camera is 1, its Motion settings will be copied to those of
cameras 2-4.)
 ESC
Press this button to escape from this screen and return to Camera Setup display. If the Save
dialog is shown, press
ENTER
to exit and save,
ESC
to exit without saving.