Operating instructions

28
6.2 Camera Setup
In Setup Menu display, press ▲▼ to change the highlighted option to Camera and then press
ENTER to call up Camera Setup display as shown.
The Camera Setup allows the administrator to define the attributes for each camera. There are up to
4 cameras which can be connected to the system.
The general operations are as below:
 ▲▼◄►
Press these buttons to select the items. The display will scroll left/right if the selected item is not
shown on the screen.
 Numeric
Press these buttons to select the camera.
 COPY
( )
Press this button to copy all the settings - excluding detailed Motion settings, Video Loss settings,
Title/Audio - of the focus camera to all the following cameras. (i.e. focus camera is 1, its settings
will be copied to those of cameras 2-4.)
 ESC
Press this button to escape from this screen and return to Setup Menu display. If the Save dialog
is shown, press ENTER to exit and save, ESC to exit without saving.
Following is a brief description for each item and its specific operations:
 Title – The title (max. 8 characters) of this camera. Please follow the Text Input method
described in Section 4.1 to modify this item.
 Video Loss Settings.. – used to setup the action settings when video loss is detected for this
camera. Press ENTER in Settings.. to call up Video Loss Setup display for the camera. Please
refer to
Section 6.2.1 for the details.