Operating instructions

The operations are as below:

 ▲▼◄►

Press these buttons to select the items.



ESC

Press this button to escape from this screen and return to previous display.

 Connect/Disconnect – If the backup device is disconnected (as shown in Current Status), please

plug the device in the backup ports (USB) and/or insert a DVD for DVD device and then press

ENTER to command the system to connect with it. If the device is already connected (EX. R/W

- Read/write, as shown in Current Status), please press ENTER to command the system software

to disconnect with the device and then unplug the device from the backup port.

Note 1: For better performance and compatibility, DO NOT format the DVD disc.

Note 2: Before using USB pen drive, please format it to FAT32 file system by MS-Windows.

Note 3: The backup device has to be connected by the system software before it can be used to

read/write.

Note 4: Some backup devices may have compatibility problems.

Note 5: Please DO NOT unplug the backup device when it’s connected or the system may

become abnormal or even hang up.

 Backup

Press ENTER when this item is selected to backup the configurations of this unit to the

corresponding device.

 Restore

Press ENTER when this item is selected to restore the configuration files in the corresponding

backup device to this unit.