Operating instructions

4.2 Login And Logout

There are three password levels in the system, including Administrator (highest), Supervisor and

Operator (lowest). If the user does not login the system, he/she will be treated as “Guest” and can

only view live video display.

The system allows up to 18 user accounts. The administrator can set up the login name and password

for each user. (Please refer to Section 6.7 for Password Setup.)

The Operator can operate live video display, the Supervisor live video display, image playback and

archive and the Administrator everything.

To login/logout the system, press MENU

in quad display to call up Menu display and

then press ENTER when the highlighted

option is Login/Logout to enter

In Login/Logout display, follow the Text

Input method described in Section 4.1 to

enter the Login name and Password, press

▲▼ to highlight and select Login option and then press ENTER to login the system. If the user

wants to logout the system, just press ▲▼ to highlight and select Logout option and then press

ENTER

. Press

ESC

to exit without making changes.

There is one factory-preset login name (aa) and password (11) at Administrator level. The user can

use it to login the system for the first time.

Should the user have forgotten all the administrator-level passwords, please contact the local

dealer or installer to recover from it.

4.3 Basic Operations

The basic user’s operations after login into the system are described below:

 Numeric

Press these buttons to switch to the full-screen display for the camera.

 Alarm Reset

Press this button to cancel alarm activation, i.e. reset the alarm outputs and silence the buzzer.

 MODE (Administrator/Supervisor)

In quad display, press this button to change circularly the live/playback mode for the focus

window and the other windows that form a rectangle on the screen.



SEQ

Press this button to switch to or return from SEQ display mode. In SEQ display mode, each page

in the sequence will be shown for the preset page dwelling time sequentially and SEQ icon will

be shown on the lower-right corner of the screen.