Operating instructions

4.1 Text Input

(with remote control)

There are certain circumstances that the system requires the user to enter text, such as system login,

camera title setup and so on. Please follow the steps below to enter text:

(1) Press ENTER to edit the highlighted option. The flashing cursor will be shown to indicate the

editing point. Besides, a keypad hint will be shown as below.

(2) Press ◄► to move the cursor to the left/right.

(3) Press

code

in text editing mode to change text case. (If this entry can accept number only,

pressing

code

will have no effects). Indicators on the screen show the current setting:

123 = Number only

abc = No capital letters

ABC = All capital letters

CODE = Internal code for the selected language, such as Chinese, Japanese, etc.

(4) Press a number key (1-9, 0) repeatedly until the character you want appears. (1 for 1 or space, 2

for 2, a/A, b/B, or c/C, for 5, j/J, k/K, l/L, MUTE for 6, m/M, n/N, o/O, the others as

shown on the keypad hint).

(5) Press mark to bring up a list of punctuation marks and special characters. The highlighted

character in the list shows the selected one. Press ▲▼◄► to change the selection.

(6) If you make a mistake, press BS to remove the character to the left of the cursor or press DEL to

delete the character at the current cursor position.

(7) In text editing mode, internal code box and mark list, press ENTER to exit and save changes,

press ESC to exit without making changes.

NOTE: if the mouse is used, clicking on the fields will display a virtual keyboard on which you can

type by clicking the letters.