Operating instructions

13

Main monitor
Connect the main monitor output connector (BNC) to a surveillance monitor or connect the
VGA output connector to a VGA monitor. The CCTV/VGA monitor displays selected live or
recorded cameras in any available split window format.
 Hard disk drive
Make sure to install one SATA hard disk (Max. storage size 500GB) inside the DVR.
Set the HDD as MASTER!. The steps are as below:
1. Power off the machine and then use a screwdriver to uncover it.
2. Use a screwdriver to fix the SATA HDD (3.5”) as shown.
3. Connect the cable to the HDD.
4. Cover the machine.
Note:
The HDD must be FORMATTED before it can be used to record video/audio. Please
refer to Section 6.6.1 to format the HDD.
 Power
Connect DC 12V power source.