Operating instructions

11
according as per Alarm Setup as described in Section 6.3.
11. Ethernet Connector (LAN)
Connect this DVR to a 10/100Base-T Ethernet network through this port.
13. Power Cord Inlet (DC 12V)
Connect DC 12V-5A power source.
14. USB connector (USB)
Connect to USB 2.0 compatible storage device, such as USB 2.0 disk drive, DVD+RW, card
reader, etc. Please note that the maximum USB current for the DVR is 500mA.
15. Mouse plug port (PS/2)
For mouse connection
16. Power Switch (POWER)
Turn the power of this unit on/off.