Operating instructions

Operation Manual – Art. 80153 (Version 1.1.6)
30
9. SPECIFICATIONS
ITEM DESCRIPTION NOTE
Video Format
NTSC / PAL
Operation System None STAND-ALONE
Camera Input Channel 4 channel Composite BNC
Video Output Channel 1 channel Composite BNC
NTSC Max 60 fps (Total)
Max. 30 frames/s
(Each Channel) Recording Frame
Rate
PAL Max.50 fps (Total)
Max. 25 frames/s
(Each Channel)
Record Mode
Time schedule, Motion detection, Sensor activated, Motion
detection & Sensor activated
Display
NTSC：720 x 480
PAL：720 x 576
Resolution
Recording
NTSC：320 x 112; 640 x 224
PAL：320 x 136; 640 x 272
Compression Method
Enhanced MJPEG
(12-20K Bytes/frame)
Video Quality:
Low @ 12K Bytes;
Normal @ 15K Bytes;
High @ 20K Bytes
HDD Support Over 500G Byte SATA or IDE ATA –100 Interface HDD×1
Method Time, Event
Search
Full Screen YES
Sensor, Alarm
4 Input (Normal Open / Normal Close)
1 Output (Alarm) (12 Pin DIP Switch)
Camera Signal Loss Alarm
2 Pin for RS485 control Pan/Tilt/Zoom
PTZ（RS485） YES PELCO-D, PELCO-P
Audio Input 2 Channels Composite RCA
Audio Output 1 Channel Composite RCA
USB YES USB 2.0 for media Backup
38KHZ Remote Control Unit Optional
PS/2 Mouse Optional
Power Input 100-240VAC/DC 12V , 3A（Adapter supplying）
Dimension (L x W x H) 300 x 70 x 290 mm