Operating instructions

Operation Manual – Art. 80153 (Version 1.1.6)
20
MOTION AREA
Use this option to select the range of motion detection area.
Use the keypad button, remote control button or mouse click to assign the area.
The keypad and mouse control instructions are below.
Using keypad or remote control button
Press [SEL] once to pitch on the area, press [SEL] twice to cancel the area.
QUAD: Select or deselect the motion detection area for motion detection recording.
CH1 - Up / CH2 - Down / CH3 - Left / CH4 - Right
Using Mouse button
While holding a left mouse click button, move the mouse to select, deselect or reselect the motion detection
area for recording.
By the way, the area only can be selected from up to down and from left to right. When the block is covered
by blue shadow it’s active to record. When the block is transparent it can’t be recorded.
After completed the motion area setting, press “MENU” button or hold a right mouse click button to
exit.
To start Motion Record, user must complete the “Motion area” setup.
5.4 SCREEN
BORDER
User can make the white borderline around each channel to appear or disappear by using this option to be
“on” or “off”.
AUTO SEQUENCE
This is for auto screen switch rotation.
Value at “Off, 1~10(in seconds)”. Default is “Off”.
VIDEO ADJUSTMENT
You can move the entire video screen up, down, left, and right
using this option.
Keypad assignment in the front panel or remote control is
below.
－CH1 for up, CH2 for down, CH3 for left, CH4 for right.
Mouse function:
Hold a right mouse click button, there will be some icons on the screen as follows “ ”. Hold a
left mouse click button to click each icon to select.
－“
▲”for up, “▼” for down, “◄” for left, “►” for right, “ ” for ESC.