Operating instructions

Operation Manual – Art. 80153 (Version 1.1.6)

5.3 ALARM

Using SELECT button or hold a left mouse button to click icon

“◄” / “►” adjust parameters of each option.

ALARM DURATION

It sets the alarm duration time (in seconds) after alarm is

activated.

Value at “05, 10, 15, 20, 25, 30, CONT, OFF”(in seconds).

Default is “OFF”.

By changing the value in the ALARM DURATION, you can

adjust how long the alarm will last in seconds. The alarm device should be installed.

BUZZER DURATION

It sets the buzzer duration time (in seconds) after alarm is activated.

Value at “05, 10, 15, 20, 25, 30, CONT, OFF” (in seconds). Default is “OFF”. When “buzzer duration” is

“cont”, the buzzer will work continuously.

EVENT REC DURATION

It sets the record time of duration (in seconds) after sensor recording or motion recording or MD & sensor

recording is activated.

Value at “05, 10, 15, 20, 25, 30” (in seconds).

SENSOR

Activate / deactivate or choose the type of sensor. There are

three different modes for sensor setting: N.C

(NORMAL-CLOSE) & N.O (NORMAL-OPEN) & NONE.

Select “None” to deactivate sensor recording or if there was

no sensor installed in DVR system.

Chose the type of sensor (N.O or N.C) installed in DVR.

MOTION DETECTION

CHANNEL

Select the channel (1,2,3,4) for recording mode by internal

motion.

SENSITIVITY

It adjusts the sensitivity of the built-in motion sensor on the

DVR system while recording. The higher the number, the

higher the sensitivity is. Value at “1, 2, 3, 4, Off”. The

maximum sensitivity level is 4.