User Guide

AC7‐SP+Quick‐StartGuide
Connectthe
BLUE connection
tubetothisconnector.
Equalisingvalve.
Presstoaccessthehandset’s
on‐boardvalvedatabase.
Use▲►▼◄buttonsformenu
navigationandtoenternumerical
data–
seenotebelow.
Presstocancelanentryorto
returntoapreviousscreen.Also
usetoswitchtheAC7‘OFF’.
Numericentries:usethe▲▼buttonstoincreaseordecreasevalues.Usethe► buttontoaddadigit.Ifadecimalpointisrequired,
pressthe▼ buttonwhenthezerodigitisshowing.Toenteranegativenumber,presstheZERO buttonbeforeanynumberisadded.
Securingring.Usethelanyardsupplied
tosuspendtheAC7frompipework(or
similar)whiletakingreadings.
PROTECTFROMFROSTINSTORAGE
PRESSANY BUTTONTOSWITCHTHEAC7‘ON’.
TOTALSYSTEMPRESSURE=10BARMAX.
Presstosetazerodatumbefore
takingameasurement.
ConnecttheRED connection
tubetothisconnector.
Internalstrainersprotectthe
sensor‐unitfromsmalldirtparticles.
Theseareserviceparts.
Note:blockedstrainerswillslow
performanceandreduceaccuracy.
Presstoacceptmenuselections
andscreenentries.
Presstoentermenuscreens.