User`s guide

Headset Button—allows you to receive voice announcements

and paging announcements while using the optional headset.

Response Message Button—makes a non-verbal response to a

SOHVA call. The response appears in the display of the calling

telephone.

Transfer/Conference Autodial Button—enables you to

pre-select telephones to which calls are frequently transferred,

allowing a single-key transfer of calls. This is most commonly

used to transfer to a voice mail system.

Subdued Off-Hook Voice Announce (SOHVA) Button—al

lows you to deliver a SOHVA call. With this button you can

decide, after hearing a busy signal, whether the called party

should be interrupted in a SOHVA manner. If so, you can press

the button and initiate a SOHVA call.

To select any of the special purpose buttons, proceed as

follows:

•

lift handset and press TALK (if necessary),

•

press intercom button (if necessary),

•

dial SS 1,

•

press unassigned function button F1–F3 to choose stor-

age location.

•

dial access code for feature,

7 = ASSIST button (then dial 0-9 for a

programmed

message or S for an assisted mes

sage)

5 = RESPONSE MESSAGE button

(then dial 0-9 for message)

6 = TRNS/CNF autodial button (then dial

extension)

8= SOHVA button

94 = Headset button

•

press T/C, press next unused function button, dial next

feature button storage code (repeat this step until desired

buttons are programmed),

–or–

•

press TALK to end.

Programming Your Telephone