User`s guide

8.6 Using Station-To-Station Messaging
When you call another telephone and no one answers, you may
leave a reminder that you called. Do this by turning on the BLF
light at the called telephone. To allow this to take place, some
-
one must have previously stored as a DSS/BLF button at the
called telephone. If your extension number is not stored as a
DSS at the called telephone, your messaging call goes to the
central message desk, if one is programmed. The central mes
-
sage desk (usually the system attendant) takes your message
and turns on the message waiting light of the telephone that
you originally called.
To turn on message light,
•
make intercom call and receive no answer,
•
dial S 7 (BLF light at called station flutters).
To turn off message light,
•
lift handset and press TALK (if necessary),
•
press intercom button (if necessary),
•
dial # 7,
•
dial extension number of telephone. DSS/BLF light turns
off.
If you are the recipient of a station-to-station message reminder
(a BLF light is fluttering), answer it as follows:
•
press preprogrammed DSS button associated with lighted
BLF light.
Sending And Receiving Non-Verbal Messages
62