User`s guide

8.3 Sending LCD Messages
You can set system-supplied messages to be received or dis
-
played by a calling LCD speakerphone. These messages give
information on your telephone status. Get a list of the available
messages from the attendant and write them on the blank list
-
ing chart on the next page.
To turn message on,
•
lift handset and press TALK (if necessary),
•
press intercom button (if necessary),
•
dial S 02,
•
dial the desired code number from your message list. The
default messages of Back At and Call may be used:
For default message 1, which is Back At, dial time in
twelve-hour format using the
# as a colon
For default message 2, which is Call, dial telephone number of
where you will be
•
press TALK to end message. Intercom light flashes
steadily.
To turn off message and your intercom light,
•
lift handset and press TALK (if necessary),
•
press intercom button (if necessary),
•
dial # 02.
LCD Message List
(Write Attendant Provided Messages Here.)
0
1 Back At
2
3 Call
4
5
6
7
8
9
Sending And Receiving Non-Verbal Messages
59