Specifications

3.20.3 Setting The Data Parameters
Description: You must set the data parameters of the data port where you connect Tracker to 9600
baud, eight data bits, one stop bit, and no handshaking to ensure proper Tracker operation.
NOTE: The Tracker base station must also be programmed for 9600 baud so that it
matches the DSU setting. The default Tracker base station baud setting is
9600; however, if you want to check or change the baud setting in the base
station, refer to section V, “Software Configuration,” of 68P81101B25–O,
Alphanumeric Interface Option.
To Program: 1. Dial 15. “BAUD RATE”
2. Dial 1 for port A
3. Dial 0811 for data parameters.
4. Press ✳✳ for configuration mode.
DSU II Digital Telephone System IMI66–132
Programming The DSU II System 3 – 153