Specifications

3.18.4 SMDR Printout
SMDR Printout As System Collected
Description: With this programming step, SMDR provides continuous printout of system-wide station
call activity as it is collected by the system.
To Program: 1. Dial 77.
2. Dial 2. “SMDR PRINT XXX”
3. Press A1 to toggle between enable and disable (A1 LED On = Enabled)
—OR—
dial 1 to enable printing “SMDR PRINT ON”
dial 2 to disable printing. “SMDR PRINT OFF”
4. Dial ✳ for configuration mode.
To change setting, repeat procedure and make opposite selection.
SMDR Cost Reporting
Description: Programming action adds the cost of each reported call to the SMDR printout.
To Program: 1. Dial 77. “SMDR PRINT ”
2. Dial 1. “XXXXXXX COSTING ”
3. Press A1 to toggle between enable and disable (A1 LED On = Enabled)
—OR—
dial 1 to enable “WITH COSTING ”
dial 2 to disable. “WITHOUT COSTING ”
4. Dial ✳ for configuration mode.
To change setting, repeat procedure and make opposite selection.
IMI66–132 DSU II Digital Telephone System
3 – 142 Programming The DSU II System