Specifications

3.18.3 SMDA Printout
Automatic SMDA Reports
Description: Call cost reports, produced by the system for printing, are generated automatically
whenever the system detects that the records storage area is ninety-five percent full.
Program the system to automatically generate these reports for printing at a certain time
each day if desired.
To Program: 1. Dial 75. “SMDA PROGRAMMING”
2. Dial 13 for auto report time “AUTO TIME XXXX”
—Dial new time in hours and minutes (HH MM in 24 hour time) or dial ✳ to accept
current time. To clear the time dial 0000.
3. Dial 14 for report definition. “AUTO REPORT ”
4. Choose reports for printing.
—Dial 1 for station report “STATION REPORT”
—Dial 2 account report “ACCOUNT REPORT”
—Dial 3 line report “LINE REPORT”
—Dial 4 department report “DEPT. REPORT”
—Dial 5 print all “PRINT RECORDS”
—Dial 6 delete records “DELETE RECORDS”
—Dial 7 for DCD report. “DCD REPORT”
5. Dial ✳ for next SMDA feature
—OR—
dial ✳✳for configuration mode.
To change setting, repeat procedure and make different selection.
IMI66–132 DSU II Digital Telephone System
3 – 140 Programming The DSU II System