Specifications

3.11.3 Station Ports For Direct Department Calling
Description: You can group stations by department to allow a call to search for an idle station within a
department. This search occurs when a busy or RNA is encountered at a called
department station. The system allows up to four departments with up to 16 stations and a
minimum of 3 stations in each one. You can place one additional station in each
department to serve as a termination station. Calls that roll to a termination station will
follow a call forward if it is set at that station.
To Program: 1. Dial 53. “STATION FEATURES”
2. Dial 19. “DEPT. CALLING ”
3. Dial 1–4 for department. 1–4. “DEPARTMENT X
4. Select department stations
—Station 10–57 = Dial 10–57.
5. Dial ✳ to program next department.
6. Dial 5–8 for termination station in department 1–4. “DEPARTMENT X ”
7. Select termination station
—Station 10–57 = Dial 10– 57.
8. Dial ✳ to program next department termination station
—OR—
dial ✳✳for next station feature
—OR—
dial ✳✳✳for configuration mode.
DSU II Digital Telephone System IMI66–132
Programming The DSU II System 3 – 97